Points to be aware of in the maintenance of an annual output of 100,000 tons of dry mortar production line.

Maintenance is very important after purchasing equipment. Good maintenance not only reduces the cost of input, but also increases profits. The dry-mix mortar production line is divided into many types according to the different production. There is a dry mortar production line with an annual output of 400,000 tons, and a dry-mix mortar production line with an annual output of 100,000 tons. Generally, there are more dry-mix mortar production lines with an annual output of 100,000 tons. How to maintain this in the process of use? Zhengzhou Jianxin Machinery will give a detailed introduction below.

Customers use the dry mortar production line produced by zhengzhou jianxin machinery.

As a set of production line equipment, the dry-mixed mortar production line with an annual output of 100,000 tons is still relatively large. To effectively ensure the use of equipment, it is necessary to make reasonable planning for the site and a reasonable production site. It is a good premise. As a mixing device, the main engine mixing is the focus of the production process, and the pressure of the main machine during the production process is still very large. We have to regularly check the main engine to ensure the lubrication of the bearings, which can effectively improve the production efficiency.

Ensuring the effectiveness of the electronic control system is also an important aspect of maintenance. Equipment production relies on the control of the electronic control system. If there is a problem with the control system, it will affect a part of the production. The equipment should be equipped with electrician personnel to regularly check the equipment to reduce the failure rate. After the feeding, the production should be stopped after the production, otherwise the materials stored in the mixing host will be deposited, the wet materials will solidify, and the restart will cause great pressure on the motor and other parts. In the long run, the dry mortar mixing plant will reduce the service life. Reducing production, this is also an aspect of equipment use.

Customers use the dry powder mortar mixing plant produced by zhengzhou jianxin machinery.

For the maintenance of the dry mortar equipment, it is best to contact the equipment manufacturer to give the manufacturer reasonable advice and methods to ensure the effectiveness of the equipment. The dry-mixed mortar production line with an annual output of 200,000 tons is also relatively expensive in terms of price. If it is damaged due to use and maintenance, this is not worth the candle.

Zhengzhou Jianxin Machinery has more than 20 years of experience in the design and production of raw material conveying, batching and mixing equipment, and has absorbed the most mature technology in Europe. It has independently developed and developed a dry-mix mortar production line with process optimization, high efficiency and energy saving, and environmental protection. specialty. Since it was put on the market, it has been very recognized by customers, and interested customers are welcome to call.

<< Previous：What are the reasons for making the dry mortar production line equipment easy to leak?
<< Next：How much is a JS series concrete mixer?

Points to be aware of in the maintenance of an annual output of 100,000 tons of dry mortar production line.

INFO REQUEST

INFO REQUEST