Analysis of Zhengzhou Jianxin Machinery Causes Damage to Main Mixing Station of Concrete Mixing Station

As we all know, the mixer is the main equipment of the concrete mixing station, which plays an important role in this mixing process. The mixing performance of the concrete mixing plant directly affects the production efficiency of our entire mixing station and the quality of the concrete. Therefore, the choice of the concrete mixing plant host is very important.
However, in the production process, we will find that the concrete mixing plant host will have some unavoidable factors in the production process caused by the damage of the concrete mixing station host. Today Zhengzhou Jianxin Machinery takes everyone to understand the damage caused by the concrete mixing station host. What is the reason?

The importance of the concrete mixing plant mainframe is known to our mixing station operators, so the operation of the mixing station equipment is also cautious during the operation, but there are still inevitable factors that cause damage to our concrete mixing plant equipment. After the long-term production of our equipment, there will be some mechanical impurities and debris that will cause the blockage of our mixing machine, but our customers will have doubts. Our mixers are all mixed with lime, mud, and how can there be metal debris? ? This is because some of the metal chips, wear products, etc. produced by our concrete mixing plant equipment during self-lifting during use. Once these impurities enter the inside of the machine and reach the mechanical mating surface, the hazard is great. It not only causes the relative movement to block, accelerates the wear of the parts, but also scratches the mating surface, destroys the lubricating film, and raises the temperature of the parts. High, lubricating oil deteriorates.
In addition to the metal scrap, our lubricants will also cause blockage of the equipment. The first piston ring of the Zhengzhou Jianxin mechanical concrete mixing plant will be 2.5 times larger than the normal value when the lubricant is filled. When the rolling bearing enters the impurity particles, its life will be reduced by 80% to 90%. Therefore, for construction machinery working in harsh environments and complex conditions, it is necessary to use high-quality, matching parts and lubricants, grease, to block the source of harmful impurities. Metal scraps and lubricant impurities are the cause of damage caused by the blockage of our concrete mixing plant. Therefore, we must pay special attention to the maintenance of these two aspects to ensure the proper operation of the equipment. Various impurities enter the inside of the machine. For faulty machinery, try to repair it at a regular repair site. When repairing on site, protective measures should also be taken to prevent parts replaced during on-site repair from being contaminated by impurities such as dust before entering the machine.
Zhengzhou Jianxin Machinery is a professional manufacturer of concrete mixing plants. At the same time, it has a complete after-sales team to ensure that users can solve problems in the event of equipment failure in the mixing station.

<< Previous：Is there a regional difference in the price of stabilized soil mixing stations?
<<  Next：Zhengzhou Jianxin Machinery analysis the difference between commericial Station Equipment and Engin