Stable soil mixing station daily cleaning can not be ignored

The machine equipment is like the right arm of the operator. The combination of work and rest, strength and goodness can be healthy.
The same is true for the stable soil mixing station. The operator can leave it behind after the operation, why Some have a long life and some have a lot of problems for the same equipment?
It may be that routine maintenance work is not done well. Today, we should remind everyone to pay attention to some precautions when cleaning the mixing machine.
Before starting the mixer, check whether the controllers are good.

After the shutdown, pour water and stones into the mixing drum for 10-15 minutes to clean, then wash the water and stones.
If the operator has to enter the mixing drum for cleaning, in addition to cutting off the power supply and removing the fuse, the switch box must be locked.
It is forbidden to use a sledgehammer to clean the concrete accumulated in the concrete mixer cylinder and only clean it with a chisel. In the cold season,when the work is finished, apply the water to clean the mixer drum and drain the water in the water pump, water tank and water pipe to prevent the water pump,water tank and water pipe from freezing.
The mixing machine will not be thoroughly cleaned for a long time, and the accumulated time will seriously affect the performance of the equipment.
Jianxin Machinery recommends that the operator be trained after professional technical training.
The operating equipment is strictly in accordance with the technical requirements to ensure safe and smooth production and stable operation of the equipment.

<< Previous：Why is the price of the forced mixer different?
<<  Next：When choosing a concrete mixing plant, choose large or small?